VORSK VMP-1X SMG Black (with 2 mags)

Built to compete in the CQB Arena, but more than capable in the Airsoft Field. When collapsed, the VMP-1 is only 345mm long. The VMP-1 is a deserving contender as an explosive secondary for any Sniper/ DMR set ups because to the option to swap out the rear stock for an M4 QD Sling Point and the forthcoming availability of aftermarket holsters. But it doesn’t have to be a backup when you’re on your local skirmish field or out in the wilderness; the VMP-1 can hit targets precisely with a predictable flight path at +30m and a very high ROF (Rate of Fire), and it will undoubtedly save you when you need it.

The VMP-1 is a fantastic primary in CQB situations because it is made of a strong, lightweight polymer. You’ll have a wide but controlled “sweep” angle when the buttstock is sunk into your shoulder and your hands are placed towards the front of the replica, which is ideal for navigating obstructions and clearing spaces. The 15° tilt mechanism built inside the buttstock enhances those corner transitions even further. With the VMP-1 held straight and your body angled around a corner thanks to the spring-centered tilt, you can lessen the likelihood of side-sweeping BBs from the hop-curve not being parallel to the ground. Along the right-hand edge of the VMP-1, the stock is foldable; to do so, merely lift the lock mechanism and rotate into place — “akimbo, anyone?” For a firm grip, the pistol grip has moulded stippling. The 20mm flattop auxiliary rail is nicely hidden with green fibre sights. When used with the buttstock, the bright fibre sights to get your eyeline behind, but they enable quick, automatic parallax sighting for quick target acquisition. You can reinstall your VMP-1 with any M4 stock of your choice because the foldable stock is integrated into an M4 Stock Tube receiver slot.

The bolt release, magazine release, and fire selector are all within easy reach and may all be accessed while holding the gun in the usual “on-trigger” posture. Trigger safety is in charge of preventing fires by requiring that you consciously pull the trigger all the way back before allowing the VMP to fire. For the VMP-1’s gas-powered engine, VORSK suggests their own GBB Fuel, V6 and V8 variations, although any high-end Airsoft Gas would work. For every refill, you should anticipate receiving at least two (and possibly three) magazines’ worth of ammunition. For a finished look, remember to get your colour-matched magazine covers. Additional magazines are available separately. The VMP-1 comes with a Hop-Tool Key to modify the hop-wheel right inside the dust cover in order to adjust the hop-unit.

The VMP-1X model is a VMP-1 that also comes with an extra 48R magazine and the “big-boy” silencer that is unique to the VMP-1. In order to truly emphasise the appearance of this powerful SMG, VORSK went beyond with the suppressor. Due to the 360° Flash Hider fitting, installation is simple. Align the grooves, press firmly, and rotate the suppressor by 30 degrees to secure it. It is possible to suspend an Airsoft Tracer Unit inside the foam-filled silencer to assist you “light-up” the fighting zone, however this is not a design element per se. Keep an eye on the VORSK social media channels to stay up to know on the development of the VMPs as more varieties are anticipated.